This installation is not fully configured

Unanswered Question
Aug 18th, 2008
User Badges:

When installing desktop app.Get the error mentioned as shown in topic\\

Have all linceses loaded have node and port licenses available.

Sorry if double posted , didn't see previous post.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
htarra Fri, 08/22/2008 - 13:03
User Badges:
  • Bronze, 100 points or more

This is CCM: Needs License issuse. You have to Installing your license file:

Before you proceed, make sure that the Cisco Unified Communications Manager server software has been installed and configured on the server.

Follow these steps to install your license file:

Step 1. Save the attached license file (.lic) to a temporary directory on

your hard drive.

Step 2. Open a supported version of the Internet Explorer browser.

Step 3. In the Location or Address field, enter the following URL,

replacing IP address with the IP address or host name of the Cisco Unified

Communications Manager server:http:// <http:///> :8080.

Step 4. Log in to the Cisco Unified Communications Manager server as system

administrator. (Be aware that user names and passwords are case-sensitive).

Step 5. From the Cisco Unified Communications Manager Administration Page,

select System -> Licensing -> License File Upload. The license file upload

page displays.

Step 6. Click on the Upload License File button, Upload File window opens.

Step 7. Click the Browse button to navigate to the location where you saved

the .lic file.

Step 8. Click Upload; then, click Continue.

The Cisco Unified Communications Manager server imports the license.

EDDY MULDER Wed, 10/08/2008 - 09:39
User Badges:

Problem fixed by reinstalling the uccx server selecting the default language (English)


This Discussion