cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
392
Views
0
Helpful
1
Replies

ASA SNMP

jgorman1977
Level 1
Level 1

I am trying to configure snmp on the ASA, but unsure of what ports to monitor and what ACL's to allow. My current config which is set on the Internal interface with no ACL's. We cannot get any trap data.

snmp-server host Internal smarts-in01 trap community Double-Take

no snmp-server location

snmp-server contact Jason Gorman, Network Operations

snmp-server community Double-Take

snmp-server enable traps snmp authentication linkup linkdown coldstart

snmp-server enable traps syslog

1 Reply 1

JORGE RODRIGUEZ
Level 10
Level 10

If you are looking to turning on SNMP on ASA take a look at this .

Turning on SNMP in the PIX/ASA

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml#turningonsnmpinthepix

Rgds

Jorge

Jorge Rodriguez
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: