cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
223
Views
0
Helpful
1
Replies

Fxo Trunk and CallPickup

ccr_cisco
Level 1
Level 1

Hello

I have one phone with an internal dn and a dn monitoring an fx0 port.

I want others phone being able to pickup calls coming to fx0 ports.

I'm able to pickup call on the internal line but not on the fxo line. here is the config :

voice-port 0/0/0

cptone FR

connection plar opx immediate 81

impedance complex2

caller-id enable

dial-peer voice 81 pots

destination-pattern A1

port 0/0/0

!

ephone-dn 81

number 81

pickup-group 500

name LINE1

label LINE1

trunk A1 monitor-port 0/0/0

ephone-dn 1 dual-line

number 221

pickup-group 500

label 221

description Reception

name Reception

allow watch

call-forward busy 600

call-forward noan 600 timeout 15

corlist incoming user900-international

ephone 1

button 1:1 2:81

Is it supported or something missing in the configuration ?

thanks for your help

Regards

1 Reply 1

aghaznavi
Level 5
Level 5

Use the following configuration guide for configuring voice ports .

Cisco IOS Voice, Video, and Fax Configuration Guide, Release 12.2 Configuring Voice Ports

http://www.cisco.com/en/US/docs/ios/12_2/voice/configuration/guide/vvfport.html#wp1054950

Configuring Phones to Make Basic Calls.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmebasic.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: