08-19-2008 03:48 AM - edited 03-07-2019 12:29 AM
Dear Sir,
We have Catalyst 6506 Core Switch with WS-X6416-GBIC card.
On this card 4 nos of Ports got in to the errordisable state suddenly.
So I have made them enable but than also the ports were not communicating. Port shows the physical connectivity but using this port no vtp database flowing.
I have also checked the fiber connectivity and GBIC. No problem in Fiber or GBIC because I have chekced fiber core and GBIC from other ports they r working.
Now what could be the problem ?
How can I troubleshoot it and identify this problem ?
If you requre more detail, I will send u ...........
Pls help !!!!!!!!!!!
Dipesh
08-19-2008 10:54 AM
Hello,
Try resetting the module and then check.
reset
HTH
Saju
08-19-2008 08:18 PM
Dear Sir,
On this all other ports are working fine. Only the 4 Ports have this problem as mentioned.
Is it ok to raised RMA for the same or it can be solved?
08-19-2008 09:57 PM
Hi
Attach the config, also show interface output.
If possible attach network diagram.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide