08-20-2008 12:35 AM
ASA Experts,
I owned a Cisco ASA 5510 with SSM10. I'll explain my dream deployment scenario and please advice !
I have 4 DSL internet lines in to the company and also a 1Mbps Internet Leased Line with a Public IP block. 4 DSL connections will be load balance by a hardware device and it will be a one gateway and the other gateway is from the Internet Leased Line Connection.
1. I need to connect these two gateways in to the ASA 5510 and manage as I need. is that possible ?
2. If that so, I need to use 4 DSL connection to browsing requirement for the LAN users and use Internet Leased Line Connection for the VPN, EMail, DMZ web server requirements ??
Please advice !!!!
Thanks a lot !
08-20-2008 04:18 AM
u can achieve it but not completly
becaue what u asking for can be done easly with PBR which is policy based routing
unfortunatly this feature not supported in ASA
but what u can do
if u have a remote network for vpn through the lease line and aslo remote DMZ network u can make the following
make a static route for each network mentioned above and mkae it through the leased line interface
then make a default route and make it point to the dsl interface
for example lets say the remote VPN LAN is 192.168.1.0/24
and the interface conncted to the leased line gateway is outside and the interface connected to the dsl gateway is outside2
do it like
route outside 192.168.1.0 255.255.255.0 [ip address of leased line router]
route outside2 0.0.0.0 0.0.0.0 [ dsl gateway IP]
good luck
please, if helpful Rate
08-20-2008 04:34 AM
ok got your point ! Thanks a lot ! I'll come with some questions soon !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide