tx-ring on 877

Answered Question
Aug 20th, 2008

My provider does not support Multilink PPP so LFI is not an option.


Is setting the tx-ring limit to 1 ok? I plan to use LLQ but wanted to do as much as possible to minimise delay.


Thanks

Correct Answer by Steve Lyons about 8 years 6 months ago

Please refer to the following document and search for qos within the document:


http://www.cisco.com/en/US/prod/collateral/routers/ps380/ps6200/prod_qas0900aecd8028a982.html


The 870 series supports advanced qos features. The document above has many references to qos support I would recommend reviewing. You do not need to modify the transmit ring. This will be modified to a value of 2 when you enable qos and attach a service policy to an interface.


Steve Lyons - Cisco

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
Steve Lyons Wed, 08/20/2008 - 16:21

Please refer to the following document and search for qos within the document:


http://www.cisco.com/en/US/prod/collateral/routers/ps380/ps6200/prod_qas0900aecd8028a982.html


The 870 series supports advanced qos features. The document above has many references to qos support I would recommend reviewing. You do not need to modify the transmit ring. This will be modified to a value of 2 when you enable qos and attach a service policy to an interface.


Steve Lyons - Cisco

Actions

This Discussion