08-20-2008 11:02 AM - edited 03-13-2019 05:35 PM
hi,
i have a cluster 5.1 CCM server`s, one publisher and 2 subcriber, and i need to configure Meet me feature, how i know what`s the max number of conference and max number of user per conference,
thx
Solved! Go to Solution.
08-20-2008 12:46 PM
Hi Jose,
With the Software Conference Bridge;
128 Streams
128 with 48 Users in each = 3
128 with 24 Users in each = 6
128 with 16 Users in each = 8
128 with 8 Users in each = 16
128 with 4 Users in each = 32
Hope this helps!
Rob
08-20-2008 11:19 AM
Hi Jose,
These number are for the Software Conference Bridge available on CCM :)
Cisco Conference Bridge Software
Software conference devices support G.711 codecs by default.
The maximum number of audio streams for this type equals 128. With 128 streams, a software conference media resource can handle 128 users in a single conference, or the software conference media resource can handle up to 42 conferencing resources with three users per conference.
From this good doc;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmsys/a05confb.html#wp1035397
The default number of Maximum MeetMe Participants (per Conference) is set at 4.
To increase the Maximum number of MeetMe participants (we have ours at 16);
Go to:
Service Parameters Configuration >Clusterwide Parameters (Service)>Maximum MeetMe Conference
Here is some additional info;
Conference Bridge Configuration
Adding a Meet-Me Number/Pattern
Hope this helps!
Rob
08-20-2008 11:51 AM
this is independent of type server that i am using? 7845-h2?
thx very much for de reply
08-20-2008 12:07 PM
Hi Jose,
These numbers are not dependant on the server model (but the 7845-H2) should serve you well in this endeavour :)
Hope this helps!
Rob
08-20-2008 12:13 PM
ok, thx, and do you know how much these mumbers?
08-20-2008 12:33 PM
Hi Jose,
If you are wondering about the co$t for this?? This is a built-in function on Callmanager :)
Hope this helps!
Rob
08-20-2008 12:37 PM
Hi Rob
No, i mean the max confer and user that the 7845-h2 server can support
08-20-2008 12:46 PM
Hi Jose,
With the Software Conference Bridge;
128 Streams
128 with 48 Users in each = 3
128 with 24 Users in each = 6
128 with 16 Users in each = 8
128 with 8 Users in each = 16
128 with 4 Users in each = 32
Hope this helps!
Rob
08-20-2008 12:52 PM
Hi Rob
Thx very much
08-20-2008 12:58 PM
Hi Jose,
You are most welcome my friend :)
Take care,
Rob
02-23-2009 02:36 PM
Rob,
In response to your math above, is that dependent on how many MeetMe numbers are created or how many are simultaneously in use?
Thanks
Brian
02-23-2009 03:35 PM
128 / Maximum MeetMe Conference Unicast value = # of simultaneous meet-me conferences.
the amount of actual meet-me DNs can be higher, lower or the same.
be aware those 128 streams are for meet-me and adhoc so if you use all for meet-me then no ad-hoc conferences can be done on that SW CFB
HTH
java
if this helps, please rate
02-24-2009 09:14 AM
Ok. The reason why I ask this is because we have 20 MeetMe DN's setup but can only have 6 people in a MeetMe session. I've changed the Cluster settings but it didn't make a difference. We only have a little over 200 phones registered and most of those are in our call center, so I don't think we will be having that many AdHoc conferences going on at one time.
Oh yeah, I'm running CCM 4.1.3 not 5.1.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: