08-20-2008 01:51 PM - edited 03-15-2019 12:44 PM
Does anyone see a problem with terminating a SIP connection (PSTN), PRI(PSTN) and FXS in a 2851 router?I know it's a broad question, but any thoughts would be great.
Solved! Go to Solution.
08-20-2008 03:39 PM
Yes.Supported.You can use multiple protocol on the same gateway SIP,H323,ISDN PRI,Analog PSTN,MGCP,SCCCP..
Better to configure as Unified Boarder elements(IP to IP gateway)
HTH
Please rate useful posts.
08-20-2008 01:57 PM
What is your concern, capacity, technology capability, best practice?
08-20-2008 01:59 PM
Best practice
&
Concern - terminating a sip (which by the way is converted to an H323 trunk to CM) and PRI into the same box, can this be done, is it supported?
08-20-2008 03:39 PM
Yes.Supported.You can use multiple protocol on the same gateway SIP,H323,ISDN PRI,Analog PSTN,MGCP,SCCCP..
Better to configure as Unified Boarder elements(IP to IP gateway)
HTH
Please rate useful posts.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: