Cluster in UCCM 6.X

Answered Question
Aug 21st, 2008

Hello I have a question.

I have the next scenario.

Cluster A Cluster B both have CAPF and CTL.

How can I to do to ip phone in cluster B can register in cluster A But without to do reset factory a ip phone. Can I to do move CCM (Tftp,CCM,CAPF)from cluster B to Cluster A. I think that ip phone from Cluster B it could registers to cluster B if within of CTL exits the same CCM,TFTP and CAPF.

any can help me?

I have this problem too.
0 votes
Correct Answer by irisrios about 8 years 3 months ago

To register the IP Phones to a different Cisco CallManager the TFTP server address will be provided by the DHCP server at your local network, but in this case you want to use a different TFTP server from the one configured on the DHCP server, you have to enter a specific TFTP server on the IP Phone.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
irisrios Wed, 08/27/2008 - 14:23

To register the IP Phones to a different Cisco CallManager the TFTP server address will be provided by the DHCP server at your local network, but in this case you want to use a different TFTP server from the one configured on the DHCP server, you have to enter a specific TFTP server on the IP Phone.

Actions

This Discussion