08-21-2008 12:57 PM - edited 03-15-2019 12:46 PM
Hello I have a question.
I have the next scenario.
Cluster A Cluster B both have CAPF and CTL.
How can I to do to ip phone in cluster B can register in cluster A But without to do reset factory a ip phone. Can I to do move CCM (Tftp,CCM,CAPF)from cluster B to Cluster A. I think that ip phone from Cluster B it could registers to cluster B if within of CTL exits the same CCM,TFTP and CAPF.
any can help me?
Solved! Go to Solution.
08-27-2008 02:23 PM
To register the IP Phones to a different Cisco CallManager the TFTP server address will be provided by the DHCP server at your local network, but in this case you want to use a different TFTP server from the one configured on the DHCP server, you have to enter a specific TFTP server on the IP Phone.
08-27-2008 02:23 PM
To register the IP Phones to a different Cisco CallManager the TFTP server address will be provided by the DHCP server at your local network, but in this case you want to use a different TFTP server from the one configured on the DHCP server, you have to enter a specific TFTP server on the IP Phone.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: