Solved: Cluster in UCCM 6.X

santiago_figueroa · ‎08-21-2008

Hello I have a question.

I have the next scenario.

Cluster A Cluster B both have CAPF and CTL.

How can I to do to ip phone in cluster B can register in cluster A But without to do reset factory a ip phone. Can I to do move CCM (Tftp,CCM,CAPF)from cluster B to Cluster A. I think that ip phone from Cluster B it could registers to cluster B if within of CTL exits the same CCM,TFTP and CAPF.

any can help me?

irisrios · ‎08-27-2008

To register the IP Phones to a different Cisco CallManager the TFTP server address will be provided by the DHCP server at your local network, but in this case you want to use a different TFTP server from the one configured on the DHCP server, you have to enter a specific TFTP server on the IP Phone.

View solution in original post

irisrios · ‎08-27-2008

To register the IP Phones to a different Cisco CallManager the TFTP server address will be provided by the DHCP server at your local network, but in this case you want to use a different TFTP server from the one configured on the DHCP server, you have to enter a specific TFTP server on the IP Phone.