Aironet 1252 with catalyst 2960-8TC-L & router 1841 compatibilty

Answered Question
Aug 21st, 2008

Hi,

First are they togther a good combination?

I'm going to buy new ap 1252 and catalyst switch 2960-8TC-L my question can I connect the ap to port 1x10/100/1000Base-T/SFP (mini-GBIC)(uplink)?

because to work on ap with full capacity 300 mbps it needs 1000 port, for powering ap I'll use powerinjector .

this will sereve 15 pc as a workgroup and 60 clients on wlan.

Regards

saher

I have this problem too.
0 votes
Correct Answer by Scott Fella about 8 years 3 months ago

Depending on what kind of traffic and bandwidth requirements the clients require, you might need a couple more ap's which means you might have to settle for a 24 port switch. Cisco recommends 15 - 25 users per so, but again, you can have more if it's just email and web browsing.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
Scott Fella Fri, 08/22/2008 - 04:50

Depending on what kind of traffic and bandwidth requirements the clients require, you might need a couple more ap's which means you might have to settle for a 24 port switch. Cisco recommends 15 - 25 users per so, but again, you can have more if it's just email and web browsing.

s.abubasheer Fri, 08/22/2008 - 13:30

thanks fella5, yes it's just for email and web browsing only,please still need a clear answer for my question can I connect the ap to that port 1x10/100/1000Base-T/SFP (mini-GBIC)(uplink), as a vlans trunk port ?

regards

saher

Actions

This Discussion

 

 

Trending Topics - Security & Network