CME 4.3 - IP phone to pickup FXS analog line

Unanswered Question
Aug 22nd, 2008
User Badges:

Hi all

I have a CME 4.3 system where I need to allow my users using 7911/7961 phones to be able to pickup the analog phone (configured on the FXS port on the router).

I have configured the voice port and dial peer for the analog extension but am not able to do any call pick up (both ways). It show "Invalid number" on the IP phone which I press pickup + XXXX. I know that the error may be due to the analog number is config on a dial peer and not a ephone-dn, so how can I make the pick up work?

*service directed-pickup is enabled.

Any advice is appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion