Solved: Unity Message - Storage Limit is Full.

Anthony O'Reilly · ‎08-22-2008

Hi,

Recently we implemented Storage Limits in Exchange for all staff. Since then if anyone has exceeded their limits, they are prompted when they access their voicemail that they sotage linit is full. I am going to change the following in the attachments below to disable.

Is there anything else I should check.

Thanks a million.

Anthony.

Rob Huffman · ‎08-22-2008

Hi Anthony,

I would have a look at this thread with nice answers from Jeff and Keith from Cisco;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&topicID=.ee835d2&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd86157

Hope this helps!

Rob

View solution in original post

Anthony O'Reilly · ‎08-22-2008

Hi,

I have made these two changes and staff are still getting this message "Hello, Your inbox is almost full"

The Version of Unity is: Cisco Unity 4.0 Build 4.0(5)

Any help will be much appreciated.

Thanks,

Anthony.

Rob Huffman · ‎08-22-2008

Hi Anthony,

I would have a look at this thread with nice answers from Jeff and Keith from Cisco;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&topicID=.ee835d2&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd86157

Hope this helps!

Rob

Anthony O'Reilly · ‎08-25-2008

Hi Rob,

Thanks a million for this, I used the registry key and this worked. I have to disable the disable funtion.

Thanks Again

Anthony.

Rob Huffman · ‎08-25-2008

Hi Anthony,

You are most welcome :) I'ts always nice when you get an answer straight from those two gurus!

Take care,

Rob