WLC + ACS - Full admin rights problem with rogue AP

Unanswered Question

Dear,


I have a Cisco ACS 4.2 (Windows) and a WLC 2106 5.1.


I would like that the Management User use the TACACS (with the ACS) to authenticate/authorize.


So I have follow the guide:

Cisco Unified Wireless Network TACACS+ Configuration (http://cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080851f7c.shtml)


Put in a users group : role1=ALL as describe in the guide.


The problem: With a user from the ACS, I want to contain a rogue AP and I receive a JavaScript Alert Box which display : Authorization Failed. No sufficent privileges.


In the management log:

---

*Aug 22 14:12:31.103: %WEB-3-USER_NOT_PRIVILEDGED: web.c:462 Form Submission Failed. The user doesn't have the right privileges.

*Aug 22 13:58:15.076: %EMWEB-1-LOGIN_FAILED: ews_auth.c:2092 Login failed. User:glemaireadm. Service-Type is not present or it doesn't allow READ/WRITE permission..

*Aug 22 13:56:46.078: %WEB-3-USER_NOT_PRIVILEDGED: web.c:462 Form Submission Failed. The user doesn't have the right privileges.

----


What I have missed in the configuration guide ? :o(


Thanks in advance,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rwilkinson Mon, 06/22/2009 - 08:54
User Badges:

Hi,


I've got the very same issue with version 5.2.178.0. When trying to reclassify an AP, the log reports the following: *Jun 22 17:33:03.839: %WEB-3-USER_NOT_PRIVILEDGED: web.c:465 Form Submission Failed. The user doesn't have the right privileges.


However, if I login as the local admin user, works fine.


Was any solution discovered for this.


Regards,


Richard Wilkinson

Richard Atkin Wed, 06/24/2009 - 00:34
User Badges:
  • Silver, 250 points or more

It sounds like you're missing a permission. Presuming you copied them all out of WCS properly, then there's probably a fault in WCS in that there's no permission/name shown for that particular activity.

Actions

This Discussion

 

 

Trending Topics - Security & Network