cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
582
Views
0
Helpful
4
Replies

MeetingPlace Audio Server

nelson-rick
Level 1
Level 1

How do I configure CallManager to recognize MeetingPlace?

1 Accepted Solution

Accepted Solutions

Jonathan Schulenberg
Hall of Fame
Hall of Fame

This is well documented in the MeetingPlace Express 2.0 Configuration and Maintenance guide: http://cisco.com/en/US/docs/voice_ip_comm/meetingplace_express/2_0/english/administration/guide/cm20call.html

View solution in original post

4 Replies 4

Jonathan Schulenberg
Hall of Fame
Hall of Fame

This is well documented in the MeetingPlace Express 2.0 Configuration and Maintenance guide: http://cisco.com/en/US/docs/voice_ip_comm/meetingplace_express/2_0/english/administration/guide/cm20call.html

I don't have MeetingPlace Express I have a MeetingPlace audio server with MeetingPlace Web/Outlook/etc...

Is the configuration the same?

Configured the IP Gateway and now I can call into MeetingPlace. Thanks for your assistance.

Hi,

We have MeetingPlace enterprise 5.3:

I configured IP gateway with CCM IP address and also added it on the CCM as a H.323 gateway, configured route pattern(5500) but when I call the number (5500), I see conected but not getting MeetingPlace Greeting!!!!!!!!

Any idea..

Thanks in advance

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: