08-24-2008 04:31 AM
I have a PIX 515E, I need to do static NAT between my exchange server and the public IP which is seating in my inside network, I need a VPN to access the citrix server and I need a PAT with the outside interface of the PIX.
Below is my network layout, I tried to do the configuration but both the configurations are not working.
Kindly help suggest some sample configurations; I will be rating the suggestions.
08-24-2008 06:30 AM
Regarding the STATIC outside >> inside natting have a look at this link:
This document is for mail, the CITRIX configuration is the same, just need to know the ports used.
For dynamic NAT/PAT you just need two lines:
nat (inside) 1
global (outside) 1 interface
Regards
Farrukh
08-24-2008 08:29 PM
Dear Farrukh
Thank you for your suggestions, can u please help us on the VPN also.
Regards
Harish Babu
08-24-2008 09:26 PM
What kind of VPN are you looking for?
VPN Remote Access?
Regards
Farrukh
08-24-2008 10:19 PM
Remote access VPN to access my internal network.
Regards
Harish Babu
08-25-2008 04:24 AM
Please have a look at these two documents, you can start from these and get back to the forum if you need any further assitance:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml
Please rate if helpful.
Regards
Farrukh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide