Multiple Site-to-Site VPN, remote site communications

Dorwin Caballero · ‎08-24-2008

I have a project which involves 16 remote locations configured with ASA5505 L2L VPN terminated on the HQ ASA5520. The have configured all the 16 remote crypto maps on the HQ ASA5520 My problem is the remote site can only communicate to the HQ, but cannot communicate to other remote site.

What can be done to accomplish remote site communications?

Farrukh Haroon · ‎08-24-2008

You will find step by step instructions in this document:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

You would need to enable the same-security 'INTRA" inteface commmand mentioned in this document.

Please rate if helpful.

Regards

Farrukh

Dorwin Caballero · ‎08-24-2008

Hi Farrukh, thank you very much for the reply. my setup has all static public IP address. The ASA are all running 8.0. I will try this configuration and get back to you ASAP! Thanks again!