Unanswered Question
Aug 25th, 2008
User Badges:

I m not able to configure the SSL VPN on cisco vpn concentrator with verion 4.x. I am not able to access the vpn concentrator via public interface. dont know what i m missing. I have enable the http/https access on public interface but still not able to do this. I even regenerate the certificate but still the problem is there.

Pleaes help me out.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
dhananjoy chowdhury Mon, 08/25/2008 - 07:57
User Badges:
  • Silver, 250 points or more

Check the following

1. Are you able to ping Public interface IP >. if not, check for the Default GW / Routes.

2. ReCheck whether you have enabled the HTTP/HTTPS management on the Interface2 (Public)

3. Did you enable WebVPN under the Interface 2 (Public)

wasiimcisco Mon, 08/25/2008 - 08:36
User Badges:

Everything checked, Concentrator is alive and so many tunnels are working fine.

HTTP/HTTPS checked i have so mnay times uncheck, disable enable interface, even restart the concentrator webVPN checked

but not working anything.

It was fine few weeks ago, but i dont know what i did wrong now it is not working.

dhananjoy chowdhury Tue, 08/26/2008 - 07:02
User Badges:
  • Silver, 250 points or more

Did you change the RULES on the default Filter applied on Public interface ?


This Discussion