Unanswered Question
Aug 25th, 2008
User Badges:

Hi All,

We have 2 Bluecoat proxy appliances connected to CSS , Is it possible to confgiure WCCP on CSS for this setup ? Our requirement is to act CSS as a transparent proxy server for internet access ?

Please advice if it possible or not ..

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
dstolt Mon, 08/25/2008 - 07:17
User Badges:
  • Cisco Employee,

CSS doesn't support the WCCP protocol. WCCP is only support on IOS router/switching platforms.



aslamta123 Mon, 08/25/2008 - 22:40
User Badges:

Thanks Dan ,

Then , is any alternate way to forward all the internaet traffic to Bluecaot appliance without any VIP ??

If you have time please have a look on the attched diagram. The comunication between the internal and Guest controller through the Mgmt interface.

The guset traffic (192 Subnet) originated from guest contrlloer needs to go proxy servers for content filtering and from proxy servers it directly goes to Internet.I am bit confused with the configuration part in the CSS . Please advice if you have any concerns


Aslam ..

dstolt Thu, 08/28/2008 - 10:57
User Badges:
  • Cisco Employee,

I think you will need to put the bluecoat appliances behind a VIP. That would give you the load balancing and failover that you will need.



This Discussion