View live traffice from specific IP

Unanswered Question
Aug 25th, 2008

How can I view all live traffic coming from a specific IP? I have a L2L tunnel setup and a few IP's on one subnet are not pingable. Trying to find out where it is dying.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
wasiimcisco Mon, 08/25/2008 - 13:41

you can use ASDM Packet tracer by defining source and destination IP addresses and also use the command line tool capture for this purposes.

make an access-list

recall this access-list in capture command

capture mycapture access-list mylist interface inside/outside.

if help please rate.

komputerguy Mon, 08/25/2008 - 13:45

If I am testing just a regular ping how do I do that?

source IP: destination IP:

What do I choose for Type, Code, and ID?? I just want it to use a standard ping.

fsmontenegro Mon, 08/25/2008 - 18:48

This on an ASA.

access-list cap extended permit ip host host

access-list cap extended permit ip host host

capture capinside access-list cap interface inside

capture capoutside access-list cap interface outside

then you can use

"show cap capinside" or "show cap capoutside" to see the traffic that was captured.

Naturally, change the interface names if you're using something else.

Farrukh Haroon Mon, 08/25/2008 - 18:28

On which device is this?

On the ASA you can either do a capture for this IP, or check the 'show conn det | inc ' command whenever you want to see this IPs connections.



Farrukh Haroon Tue, 08/26/2008 - 05:50

Ok then you can use the capture command or the show conn suggested earlier.




This Discussion