08-25-2008 08:50 PM - edited 03-03-2019 11:16 PM
Dear support guys,
Can we advertise only the two summarize routes 10.8.0.0/16 and 10.4.0.0/16 on our CISCO routers which are connected to our collabarative network?
08-25-2008 09:02 PM
Hi,
It is important to know where you are summarizing the routes in the Network and in which routing protocol you are running ??
08-25-2008 09:10 PM
We are running OSPF routing protocol and we want to configure this on our perimeter devices which are connected to our collabarative network.
08-25-2008 09:14 PM
Please answer my question
08-25-2008 10:12 PM
Yes it is possible, provided you are aware of the collaborative network address space.
I mean to say , there are no discontigeous subnets/address space.
08-26-2008 04:59 AM
You must also do this on an ABR when summarizing between areas.
You can use the area range command to summarize between areas
Use the summary-address command if you are summarizing outside OSPF or within a different process
http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml#t28
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
