08-26-2008 12:15 AM - last edited on 03-25-2019 05:18 PM by ciscomoderator
Is it possible to see the amount of ip addresses that are count by the ASA in order to order the correct user license for the CSC module ?
Regards,
Remco
Solved! Go to Solution.
08-26-2008 05:20 AM
Yes but you have to 'sample' it over a reasonable period of time at the most probable 'peak time'. Netflow is the ideal tool for this but its not supported on any ASA except the 5580. You can also download a trial versio of fireplotter (fireplotter.com) for this purpose. It really helps in this regard.
Regards
Farrukh
08-26-2008 04:28 AM
Please have a look at this link:
Regards
Farrilj
08-26-2008 04:57 AM
Thanks Farrilj
According to the document,you can size the license by the number of ip connections or the network traffic mix. If one of two is reached, you have to upgrade the license ??
So the "show conn fport 80" command can give a realistic view of concurrent connections ?
08-26-2008 05:20 AM
Yes but you have to 'sample' it over a reasonable period of time at the most probable 'peak time'. Netflow is the ideal tool for this but its not supported on any ASA except the 5580. You can also download a trial versio of fireplotter (fireplotter.com) for this purpose. It really helps in this regard.
Regards
Farrukh
08-26-2008 05:38 AM
Thanks. I'll check FirePlotter...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide