Cisco CSM Secure routed mode

o.ilesanmi · ‎08-26-2008

Hi,

Please how do i get direct access to the real servers using the mode above. I can ping the real servers but i cannot connect on other ports to them.Note that the default gateway for the servers is the alias IP

vlan 1 server

ip add 10.10.10.10 255.255.255.0

alias 10.10.10.1 255.255.255.0

vlan 2 client

ip add 10.10.20.10 255.255.255.0

gateway 10.10.20.250

serverfarm server

real 10.10.10.100

inservice

real 10.10.10.101

inservice

vserver vip

virtual 10.10.20.100 any

serverfarm server

massimiliano.serafino · ‎08-26-2008

Hi,

Look at Content Switching Module for Server Load Balancing and Direct Access to Real Servers Configuration Example

Reference: http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00801a51ba.shtml

I hope this helps.

Best regards.

Massimiliano.

o.ilesanmi · ‎08-26-2008

Hi,

I have tried this method by adding the MSFC as the gateway for the server vlan but it comes back with the error message

'Gateway 10.10.20.250 does not match subnet of VLAN 1 address'

o.ilesanmi · ‎09-01-2008

what will be the default gateway for the real servers?