1200 Series Access points

Unanswered Question
Aug 26th, 2008

I have an problem with multiple access points losing the ability to telnet to them.They access points work fine but the only way I can get the ability to telnet back is to restart them. Has anyone else had this problem.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
SJessulat_2 Fri, 08/29/2008 - 00:42

Hi,

what kind of authentication do you use for the vty lines (local, radius, ...).

The easiest way would be to paste the config here, or at least a part of it.

Regards,

Sebastian

Greg Johnson Wed, 09/17/2008 - 06:58

I am using Radius. This is what the config looks like.

Thanks for your help Greg

line con 0

password 7 110B15041317

login authentication local_auth

transport preferred all

transport output all

line vty 0 4

password 7 104C05180112

login authentication rad_auth

transport preferred all

transport input all

transport output all

line vty 5 15

password 7 104C05180112

login authentication rad_auth

transport preferred all

transport input all

transport output all

jeff.kish Thu, 09/18/2008 - 08:23

Any chance you're maxing out your telnet sessions? It seems unlikely that you'd be hitting 16 unless you telnet around a lot each day and never log out. Still, might be worth checking out.

SJessulat_2 Thu, 09/18/2008 - 21:45

You could enable SSH and try to connect that way, maybe it makes a difference.

Additionally, if it is possible, connect via console when you're not able to telnet an AP and check the system output.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode