08-26-2008 10:03 AM - edited 07-03-2021 04:22 PM
I have an problem with multiple access points losing the ability to telnet to them.They access points work fine but the only way I can get the ability to telnet back is to restart them. Has anyone else had this problem.
08-29-2008 12:42 AM
Hi,
what kind of authentication do you use for the vty lines (local, radius, ...).
The easiest way would be to paste the config here, or at least a part of it.
Regards,
Sebastian
09-17-2008 06:58 AM
I am using Radius. This is what the config looks like.
Thanks for your help Greg
line con 0
password 7 110B15041317
login authentication local_auth
transport preferred all
transport output all
line vty 0 4
password 7 104C05180112
login authentication rad_auth
transport preferred all
transport input all
transport output all
line vty 5 15
password 7 104C05180112
login authentication rad_auth
transport preferred all
transport input all
transport output all
09-18-2008 08:23 AM
Any chance you're maxing out your telnet sessions? It seems unlikely that you'd be hitting 16 unless you telnet around a lot each day and never log out. Still, might be worth checking out.
09-18-2008 09:45 PM
You could enable SSH and try to connect that way, maybe it makes a difference.
Additionally, if it is possible, connect via console when you're not able to telnet an AP and check the system output.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: