1200 Series Access points

Greg Johnson · ‎08-26-2008

I have an problem with multiple access points losing the ability to telnet to them.They access points work fine but the only way I can get the ability to telnet back is to restart them. Has anyone else had this problem.

SJessulat_2 · ‎08-29-2008

Hi,

what kind of authentication do you use for the vty lines (local, radius, ...).

The easiest way would be to paste the config here, or at least a part of it.

Regards,

Sebastian

Greg Johnson · ‎09-17-2008

I am using Radius. This is what the config looks like.

Thanks for your help Greg

line con 0

password 7 110B15041317

login authentication local_auth

transport preferred all

transport output all

line vty 0 4

password 7 104C05180112

login authentication rad_auth

transport preferred all

transport input all

transport output all

line vty 5 15

password 7 104C05180112

login authentication rad_auth

transport preferred all

transport input all

transport output all

jeff.kish · ‎09-18-2008

Any chance you're maxing out your telnet sessions? It seems unlikely that you'd be hitting 16 unless you telnet around a lot each day and never log out. Still, might be worth checking out.

SJessulat_2 · ‎09-18-2008

You could enable SSH and try to connect that way, maybe it makes a difference.

Additionally, if it is possible, connect via console when you're not able to telnet an AP and check the system output.