ASA vrs WatchGuard L2L VPN ?

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
dhananjoy chowdhury Tue, 08/26/2008 - 22:01

Doing a debug on the ASA can help, put this commands

"debug cry ips"

"debug cry isa"

Then initiate a ping to the subnet in your main office.

Capture the debug messages on the screen.

if you don't get any debug message on the screen , then check the following

- proper routing for the remote end IP subnet

- correct Crypto Access-list


This Discussion