08-27-2008 11:52 AM - edited 03-15-2019 12:52 PM
Hi All,
I am getting the following error with Real Time Monitor.
LogPartitionLowWaterMarkExceeded UsedDiskSpace : 90 MessageString : Disk utilization hits LWM! AppID : Cisco Log Partition Monitoring Tool ClusterID : NodeID : CM-PUBK
Any idea on how to fix it ?
I found this information about the error:
CCM_TCT-LPMTCT-3-LogPartitionLowWaterMarkExceeded : The percentage of used disk space in the log partition has exceeded the configured low water mark. UsedDiskSpace [String] MessageString [Optional]. [String]
Explanation The percentage of used disk space in the log partition has exceeded the configured low water mark. There is no files to be purged under such a situation.
Recommended Action Check if the configured low water mark for used disk space in the log partition is too low. And also please examine each application trace log files and clean up those that are too old and too bbig before the used disk space exceeds the high water mark.
But it does not show how to clear out the logs.
any help would be appreciated!
08-27-2008 12:03 PM
What version of CCM are you running, in version 4.x, the watermark is set to 20% which can be increased in Enterprise Manager. Settings are a bit different in CCM 5.x/6.x
08-27-2008 12:06 PM
We are running version
6.1.1.2000-3
in the real time monitor the level is set to 90
08-27-2008 12:47 PM
I think I have seen this before and its a known bug in the version of CUCM, there are some .pdf files for CAR that gets populated which donot get deleted automatically and occupies disk space. I would recommend to open up a TAC case.
08-27-2008 01:16 PM
thanks,
we'll open one up
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide