VPN to Sonicwall

Unanswered Question
Aug 28th, 2008

Hi all,

I have an ASA 5505 and I'm trying to build a site to site VPN to a sonicwall firewall.

The firewall is doing NAT and has a net connection. I followed the directions at cisco's site to the letter (they had a document describing how to setup a VPN from a sonicwall to an ASA).

Anyway,

My LAN is 192.168.12.0/24 and the remote LAN is 10.5.0.0/24

Here's my config. Any ideas? I'm stumped.

ASA Version 7.0(7)

!

hostname asa1

domain-name test.net

enable password **************

names

dns-guard

!

interface GigabitEthernet0/0

nameif inside

security-level 100

ip address 192.168.12.14 255.255.255.0

!

interface GigabitEthernet0/1

nameif outside

security-level 0

ip address 66.*.*.2 255.255.255.252

!

interface GigabitEthernet0/2

shutdown

no nameif

no security-level

no ip address

no nameif

no security-level

no ip address

!

interface Management0/0

shutdown

no nameif

no security-level

no ip address

!

passwd **************

ftp mode passive

same-security-traffic permit inter-interface

same-security-traffic permit intra-interface

access-list inside_nat0_outbound extended permit ip any 192.168.12.0 255.255.255

.0

access-list pixtosw extended permit ip 192.168.12.0 255.255.255.0 10.5.0.0 255.2

55.255.0

pager lines 24

logging console debugging

mtu outside 1500

mtu inside 1500

no failover

arp timeout 14400

global (outside) 1 interface

nat (inside) 0 access-list pixtosw

nat (inside) 1 0.0.0.0 0.0.0.0

route outside 0.0.0.0 0.0.0.0 66.*.*.1 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00

timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00

timeout uauth 0:05:00 absolute

http server enable

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

crypto ipsec transform-set austinlab esp-3des esp-sha-hmac

crypto dynamic-map ciscopix 1 set transform-set austinlab

crypto map dynmaptosw 66 ipsec-isakmp dynamic ciscopix

crypto map dynmaptosw interface outside

isakmp identity address

isakmp enable outside

isakmp policy 13 authentication pre-share

isakmp policy 13 encryption 3des

isakmp policy 13 hash sha

isakmp policy 13 lifetime 28800

isakmp policy 65535 authentication pre-share

isakmp policy 65535 encryption 3des

isakmp policy 65535 hash sha

isakmp policy 65535 group 2

isakmp policy 65535 lifetime 86400

tunnel-group 10.5.0.0 type ipsec-l2l

tunnel-group 10.5.0.0 ipsec-attributes

pre-shared-key *

tunnel-group 192.168.12.0 type ipsec-l2l

tunnel-group 192.168.12.0 ipsec-attributes

pre-shared-key *

telnet timeout 5

ssh timeout 5

console timeout 0

!

class-map inspection_default

match default-inspection-traffic

!

!

policy-map global_policy

class inspection_default

inspect dns maximum-length 512

match default-inspection-traffic

!

!

policy-map global_policy

class inspection_default

inspect dns maximum-length 512

inspect ftp

inspect h323 h225

inspect h323 ras

inspect netbios

inspect rsh

inspect rtsp

inspect skinny

inspect esmtp

inspect sqlnet

inspect sunrpc

inspect tftp

inspect sip

inspect xdmcp

!

service-policy global_policy global

Cryptochecksum:xxx

: end

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
t4tauseef33 Tue, 09/02/2008 - 07:30

tunnel-group 10.5.0.0 type ipsec-l2l

tunnel-group 10.5.0.0 ipsec-attributes

pre-shared-key *

tunnel-group 192.168.12.0 type ipsec-l2l

tunnel-group 192.168.12.0 ipsec-attributes

pre-shared-key *

The above one is wrong

tunnel-group 216.183.* type ipsec-l2l

tunnel-group 216.183.* ipsec-attributes

pre-shared-key *

Actions

This Discussion