ERROR: mapped-address conflict with existing static

Tshi M · ‎08-28-2008

I am trying to NAT the same external address to three different hosts but using the same port.

static (inside,outside) tcp 63.76.x.x 8224 208.x.x.29 8224 netmask 255.255.255.255

static (inside,outside) tcp 63.76.x.x 8224 208.x.x.23 8224 netmask 255.255.255.255

static (inside,outside) tcp 63.76.x.x 8224 208.x.x.153 8224 netmask 255.255.255.255

d.donnelly · ‎09-02-2008

Not possible I'm afraid. You'll need to use different ports for both the original and mapped IP's.

Tshi M · ‎09-02-2008

Right, I tried different scenarios but it is not possible. I should have of removed this post last week.