cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1323
Views
0
Helpful
2
Replies

SAP R3 QoS

ladislao2006
Level 1
Level 1

Hello, please anybody knows about what's the SAP R3 size packets in order to provide Bandwidth QoS?

2 Replies 2

Marwan ALshawi
VIP Alumni
VIP Alumni

the following is config example from cisco press regarding SAP policing maybe helps u:

CAT3550(config)#ip access-list extended SAP

CAT3550(config-ext-nacl)# permit tcp any range 3200 3203 any

CAT3550(config-ext-nacl)# permit tcp any eq 3600 any

CAT3550(config)#class-map SAP

CAT3550(config-cmap)# match access-group name SAP

CAT3550(config)#policy-map UNTRUSTED-SERVER

CAT3550(config-pmap)#class SAP

CAT3550(config-pmap-c)# set ip dscp 25 ! SAP is marked as Mission-Critical

CAT3550(config-pmap-c)# police 15000000 8000 exceed-action policed-dscp-transmit

! Out-of-profile SAP is marked down to Scavenger (CS1)

good luck

if helpful Rate

Joseph W. Doherty
Hall of Fame
Hall of Fame

Sorry I don't, but R3 isn't real tolerant of delay or drops. Best thing would be guarantee ample bandwidth via QoS (perhaps initially 50% with CBWFQ), monitor actual bandwidth demand of R3 in your environment, then adjust bandwidth guarantee.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: