CH E1

msasikumar · ‎08-29-2008

can any one helpout to me?

How to do configure the channalaized E1 on Cisco 7206 and in that multichannel card is there

Giuseppe Larosa · ‎08-29-2008

Hello Asi,

if you are using a channelized E3 multichannel E3

you need to go though two levels hierarchy:

define and configure E3 controller

define and configure each child E1 controller

or if you are using a multichannel E1

Hope to help

Giuseppe

mohsin.khan · ‎08-30-2008

Hi Sasi,

To sum it up, you must define the controller for channelized E1/T1 (E1 in your case)

"controller E1 1/0

channel-group 30 timeslots 1-31 "

//where 1 is your row#,0 is your module #

"interface Serial3/1:30"

// So only difference in channalized E1 and serial E1 is that you have to define 30 channel's grouping, rest is same as for the serial"