commands change after reboot

Unanswered Question
Aug 29th, 2008
User Badges:

hi


i have this scenario: ccm 6.1, e1 configured as mgcp gateway on 2821

i have a problem that is everytime when the router reboots this command:

mgcp call-agent 192.168.1.10 2427 service-type mgcp version 1


changes to

mgcp call-agent my-router 2427 service-type mgcp version 1


i mean after reboot the ip address in the above command changes to gateway name

so i have to change the name to ip address manually again so that the gateway is going to register with ccm


another same issue, e1 is configured with framing no-crc4, also after reboot this framing type is removed and i have to configure it manually again so that isdn layers will come up and work fine...


did anyone face like this before


plz help

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
mciarfello Fri, 08/29/2008 - 21:55
User Badges:
  • Silver, 250 points or more

Maybe: I can't remmeber exactly.

no ip domain name

no ip name-server


or if you can't beat 'em, join 'em. Just config a static host

ip host my-router 192.168.1.10


As far as the framing, set it in CallManager. Sounds like you have "ccm-manager config" turned on. When you reboot the router, it is downloading the config from CallManager which is "wrong"

Actions

This Discussion