Does the data port # refer to the actual port # on the switch ports. With the following configuration could you please explain what does 'Gi3/2, Gi13/d1' display mean in 'show vlan id 661'

router# show run | include intrusion-detection

intrusion-detection module 13 management-port access-vlan 147

intrusion-detection module 13 data-port 1 access-vlan 661

intrusion-detection module 13 data-port 2 access-vlan 662

router# show vlan id 661

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

661 ward-attack3 active Gi3/2, Gi13/d1

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

661 enet 100661 1500 - - - - - 0 0

Remote SPAN VLAN

----------------

Disabled

Thanks