ntp clock period configuration

Answered Question
Aug 30th, 2008

hi,

can someone give me a link or on how to configure ntp clock <period>. do we calculate for it or is it there a default?

Router(config)#ntp clock ?

<0-4294967295> Clock period in 2^-32 seconds

I have this problem too.
0 votes
Correct Answer by Mark Yeates about 8 years 4 months ago

John,

There is no need co configure the NTP clock period. It is not recommended to set the clock period as the defaults will work just fine. Please see the following links.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a0080093f16.shtml#qa3

and

http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html#wp1018798

HTH,

Mark

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
Correct Answer
Mark Yeates Sat, 08/30/2008 - 12:48

John,

There is no need co configure the NTP clock period. It is not recommended to set the clock period as the defaults will work just fine. Please see the following links.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a0080093f16.shtml#qa3

and

http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html#wp1018798

HTH,

Mark

Actions

This Discussion