Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
26829
Views
15
Helpful
1
Replies

ntp clock period configuration

Go to solution
johnlloyd_13
Level 9
Level 9

‎08-30-2008 11:33 AM - edited ‎03-06-2019 01:05 AM

hi,

can someone give me a link or on how to configure ntp clock <period>. do we calculate for it or is it there a default?

Router(config)#ntp clock ?

<0-4294967295> Clock period in 2^-32 seconds

2 people had this problem
Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Mark Yeates
Level 7
Level 7

‎08-30-2008 12:48 PM

John,

There is no need co configure the NTP clock period. It is not recommended to set the clock period as the defaults will work just fine. Please see the following links.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a0080093f16.shtml#qa3

and

http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html#wp1018798

HTH,

Mark

View solution in original post

1 Reply 1

Go to solution
Mark Yeates
Level 7
Level 7

‎08-30-2008 12:48 PM

John,

There is no need co configure the NTP clock period. It is not recommended to set the clock period as the defaults will work just fine. Please see the following links.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a0080093f16.shtml#qa3

and

http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html#wp1018798

HTH,

Mark

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card