08-30-2008 11:33 AM - edited 03-06-2019 01:05 AM
hi,
can someone give me a link or on how to configure ntp clock <period>. do we calculate for it or is it there a default?
Router(config)#ntp clock ?
<0-4294967295> Clock period in 2^-32 seconds
Solved! Go to Solution.
08-30-2008 12:48 PM
John,
There is no need co configure the NTP clock period. It is not recommended to set the clock period as the defaults will work just fine. Please see the following links.
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a0080093f16.shtml#qa3
and
http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html#wp1018798
HTH,
Mark
08-30-2008 12:48 PM
John,
There is no need co configure the NTP clock period. It is not recommended to set the clock period as the defaults will work just fine. Please see the following links.
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a0080093f16.shtml#qa3
and
http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html#wp1018798
HTH,
Mark
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: