08-31-2008 09:36 AM - edited 03-15-2019 12:57 PM
Hi all,
I use cme4.1 with 12.4(15)T4 IOS.
After I set some translation profiles and rules for separate accounting purpose (shared call manager between 3 companies with separate voice ports) the full-consultative transfer stopped to work. When I want to transfer, both calls remain in hold state and I get a busy tone, although the local-consultative and blind transfer is still working.
However when I set the local-consult transfer and I want to initiate a three party hardware assisted ad-hoc conference only 2 party-s are joined the third party is dropped. If I set back to blind transfer the three party conference call is working fine.
Here is my related conf:
voice translation-rule 1
rule 1 /^9/ /19/
!
voice translation-rule 2
rule 1 /^9/ /29/
!
voice translation-rule 3
rule 1 /^9/ /39/
!
!
voice translation-profile AMGAZ
translate called 3
!
voice translation-profile DIRECTONE
translate called 2
!
voice translation-profile PIAR
translate called 1
.
.
.
dial-peer voice 1 pots
translation-profile incoming AMGAZ
answer-address 6..
!
dial-peer voice 3 pots
translation-profile incoming PIAR
answer-address 8..
!
dial-peer voice 2 pots
translation-profile incoming DIRECTONE
answer-address 7..
!
.
.
.
dial-peer voice 600 pots
corlist outgoing call-mobile
description AMGAZ-Mobile Calls
destination-pattern 1907[0-9].......
port 0/0/0
forward-digits 10
!
dial-peer voice 601 pots
corlist outgoing call-national
description AMGAZ-National Calls
destination-pattern 190[1-5]........
port 0/0/0
forward-digits 10
!
dial-peer voice 700 pots
corlist outgoing call-mobile
description DIRECTONE-Mobile Calls
destination-pattern 2907[0-9].......
port 0/0/1
forward-digits 10
!
dial-peer voice 701 pots
corlist outgoing call-national
description DIRECTONE-National Calls
destination-pattern 290[1-5]........
port 0/0/1
forward-digits 10
telephony-service
sdspfarm conference mute-on 111 mute-off 222
sdspfarm units 4
sdspfarm tag 1 confprof1
sdspfarm tag 2 transcod1
conference hardware
load 7960-7940 P0030702T023
load 7911 P00307020200
max-ephones 96
max-dn 288
ip source-address 10.10.10.1 port 2000
service phone videoCabability 1
system message CCME4.1
url services http://phone-xml.berbee.com/menu.xmlopts=1234567
time-zone 34
time-format 24
date-format dd-mm-yy
max-conferences 8 gain -6
call-park system redirect
call-forward pattern .T
moh music-on-hold.au
multicast moh 239.1.1.1 port 2000
dn-webedit
time-webedit
transfer-system local-consult
transfer-pattern .T
secondary-dialtone 9
login timeout 1
Any help would be appreciated!
Oszkar
09-05-2008 09:35 AM
I think you are missing the transfer pattern.In Cisco Unified CME 4.0(1) and later versions, the line button for a monitored line can be used as a DSS for a call transfer when the monitored line is in-use, provided that the actual call transfer can succeed; for example, when the monitored line is configured for Call Forward Busy or Call Forward No Answer.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: