08-31-2008 08:55 PM - edited 07-03-2021 04:24 PM
hi guys,
i have a air-br1310g-a-k9-r box.
i had the firmware c1310-k9w7-mx.123-8.ja on it.
i upgraded this unit to the firmware c1310-rcvk9w8-tar.124-10b.JA3
after doing so my unit doesn't work any more.
I'm getting the error the messages as posted in the attachment and the units reboots continuously.
how can i get my unit back into working order?
09-01-2008 06:04 AM
Hi ,
The problem here is that the IOS image that was loaded is a LWAPP Recovery image (note the rcvk9w8 in the image name)
Here is a thread where Doug managed to recover his 1310;
Hope this helps!
Rob
09-02-2008 03:20 AM
Thank you for your post.
this helped me solve my problem. my bridge is up and running again.
09-02-2008 04:45 AM
Hi Guillaume,
You are most welcome my friend! Glad to hear that this worked for you.
Take care,
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide