Accessing 2 vlan from one NIC

Unanswered Question
Aug 31st, 2008
User Badges:

Hi all,

I have requirement to access two vlan from my PC.

I have configred the LAN switch(cisco 2960G) as trun port,In my NIC intel 82566-dm2 gigabit ethernet card configured two vlans.

But it is not working..

If any setting to be done on the switch apart from configuring it as trunk port.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
satish_zanjurne Sun, 08/31/2008 - 23:03
User Badges:
  • Silver, 250 points or more

Does this NIC supports TRUNKING/TAGGING, Native VLAN??

satish_zanjurne Mon, 09/01/2008 - 00:25
User Badges:
  • Silver, 250 points or more

Then apart from regular config like

switchport mode trunk

switchport trunk encapsulation dot1q

Also make sure Native VLAN is same on both sides.

This should work...

Dileep Sivadas ... Mon, 09/01/2008 - 23:31
User Badges:

my issue is resolved..

the problem was with trendmicro office scan installed on that pc and it has firewall and IDS features.After i disabled the firewall on network card both VLANs are working fine.

satish -thanks for reply


This Discussion