pix515e vpn

Unanswered Question
Sep 1st, 2008
User Badges:


We have a problem with our pix515e,i have two tunnel in my pix 1 to us and the other to aus.AUS tunnel is working fine,all of a sudden my US tunnel is not working.my pix shows tunnel is up but i am not able to ping my servers in US.Packet is reaching upto USA end Public ip, when we

checkout with ping and traceroute command. Encapsulation is happening but

decapsulation is not happening .

IPsec Vpn tunnel from chennai to Australia end is working fine . Chennai to

USA end , tunnel is established but decapsulation is not happening there. we

have checked out the configuration in both chennai and USA end. If we try to

establish the site to client vpn using cisco vpn client , then it is working

fine from outside network.

please help me to resolve this issue.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Marwan ALshawi Mon, 09/01/2008 - 06:54
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

try to clear xlate

clear conn

or reload


This Discussion