Management Interface with AP-1231G

Unanswered Question
Sep 1st, 2008
User Badges:

I have a AP-1231G and would like to have a managment IP on the FastEthernet Interface. Is this possible?


I read, that the managment IP has to be on the native vlan. Bridge-group 1 is automaticaly to the native vlan and a second bridge-group hasn't realy worked. So i'm a little bit confused.


Can anybody help me?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Mon, 09/01/2008 - 15:55
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

With autonomous ap's you need to set the BVI interface with the management. Then on the trunk port you set your management as native vlan. You then can go ahead and create other vlans and ssid's.



Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode