09-01-2008 12:13 PM - edited 02-21-2020 03:55 PM
Hello,
i need on configuring remote-access vpn on a 2800 series router with authentication using acs..
cisco config link or guidliness would be appreciated.
09-01-2008 02:11 PM
Try this link
http://www.cisco.com/en/US/tech/tk59/technologies_configuration_example09186a00800a393b.shtml
There are few more config examples here as well.
http://www.cisco.com/en/US/products/ps5854/prod_configuration_examples_list.html
Rgds
Jorge
09-02-2008 05:01 AM
Thanks...
I need config which support Microsoft VPN Client ...
the attached link is for Cisco VPN Client
Kindly help.
09-02-2008 07:27 AM
Refer to thee three links
http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml
Also see Point-to-Point Tunneling Protocol (PPTP) section
http://www.cisco.com/en/US/tech/tk827/tk369/tech_configuration_examples_list.html
PLS rate any helpful post if it helps
Rgds
Jorge
09-02-2008 11:47 PM
Thanks ; very helpful link.
Does the folllowing lines means that initially the authentication would be ACS-Server and incase ACS-Server is down then it would router-local username/password [[ Is this True ]]
aaa authentication ppp default group radius local
aaa authentication login default local
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: