Jon Marshall Mon, 09/01/2008 - 17:07
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

You simply need to copy the config to a tftp server and they will appear in clear text.


Use the "write net :"filename" command.


Jon

stephen.stack Tue, 09/02/2008 - 04:58
User Badges:
  • Silver, 250 points or more

hi


try this at the command prompt.


more system:running-config



Cheers


Stephen

jason.edelman Tue, 09/02/2008 - 11:58
User Badges:

I actually saw both of these options listed under the 7.x code, but wasn't sure about 6.3.


I don't have the boxes handy to test them, so I will have to wait and see.


Are you sure they work for PIX 6.3?


Thanks,

Jason


Jon Marshall Tue, 09/02/2008 - 13:27
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Jason


Saving the config to a tftp server definitely works for 6.3 code as i used to do it all the time.


The other command looks like a 7.x command to me so i can't say for sure.


Jon

Actions

This Discussion