Block incoming call based on caller-id

Unanswered Question
Sep 2nd, 2008
User Badges:

I am trying to find a way to block all calls from a specific PSTN calling number on MGCP gateways with PRIs running under CallManager 4.1.3. I know I could do it with H.323, but don't see an elegant solution under MGCP.

All ideas appreciated.

Bruce

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Tue, 09/02/2008 - 06:35
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

bjenders Tue, 09/02/2008 - 06:45
User Badges:

Thanks Rob,

This was as much a sanity check on my part as anything else. I just wanted to make certain I wasn't forgetting a trick, or missing a new capability.

Thanks for the reply,

Bruce

Rob Huffman Tue, 09/02/2008 - 07:50
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Bruce,


You are most welcome :) Sorry for no new info here.


Take care,

Rob

Actions

This Discussion