Block incoming call based on caller-id

bjenders · ‎09-02-2008

I am trying to find a way to block all calls from a specific PSTN calling number on MGCP gateways with PRIs running under CallManager 4.1.3. I know I could do it with H.323, but don't see an elegant solution under MGCP.

All ideas appreciated.

Bruce

Rob Huffman · ‎09-02-2008

Hi Bruce,

As you nicely noted this is possible if the Gateway uses H.323, there is no way using MGCP :( Many have tried .........

Mahesh @ Cisco

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf8746/2#selected_message

TAC Case from Jorge

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K15182736

Another good related thread (answers from both Mahesh and Jorge)

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf1257/5#selected_message

Hope this helps!

Rob

bjenders · ‎09-02-2008

Thanks Rob,

This was as much a sanity check on my part as anything else. I just wanted to make certain I wasn't forgetting a trick, or missing a new capability.

Thanks for the reply,

Bruce

Rob Huffman · ‎09-02-2008

Hi Bruce,

You are most welcome :) Sorry for no new info here.

Take care,

Rob