sateeshk10 Tue, 09/02/2008 - 07:52
User Badges:

Hi,


In the same PIX i have conduit and ACL also.. Now i want to convert all conduit to ACL...


Regards

sateesh

Ignor my last post - there is a way:-


at:-


http://www.cisco.com/en/US/docs/security/asa/migration/guide/pix2asa.html#wp284407


I found this:-


Converting the conduit and outbound Commands


The recommended method for converting conduit and outbound commands is to use the OCC tool. However, the OCC tool is only supported on Windows and Solaris. To convert conduit and outbound commands on Linux or Macintosh, you must use the online Output Interpreter tool. See https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl.


HTH>

sateeshk10 Tue, 09/02/2008 - 08:40
User Badges:

Hi,


Thanks for info..


I have tried thru output intrepretter ..But sh conduit command is not supporting..


But i have to try with OCC


Regards

sateesh

sateeshk10 Wed, 09/03/2008 - 06:50
User Badges:

Hi,


I gettign the following error..


WRITE TERMINAL - APPLY/CONDUIT/OUTBOUND TO ACCESS-LIST CONVERSION

TOOL NOTIFICATIONS (if any)


Please find the converted PIX Access-list statements from conduit, outbound or apply

statements.

NOTE: Thoroughly review the converted access-list statements and verify that the

conversion matches security policies.


Unrecognized character  at /opt/httpd/root/apps/output/bin/converter.bin line

1.

Regards

sateesh

Actions

This Discussion