hi all,
i have alert that shows
sh int vlan6
Vlan6 is up, line protocol is down
Hardware is EtherSVI, address is 0017.95ab.1130 (bia 0017.95ab.1130)
Description: ProSoft_MAS
Internet address is 172.29.12.1/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:21:37, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 2
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
3553043 packets input, 356607841 bytes, 0 no buffer
Received 10719 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
4417091 packets output, 297003733 bytes, 0 underruns
0 output errors, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
copchgasr4#sh vlan-switch
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active
5 SCADA_LAN active Fa1/1
6 Prosoft active Fa1/2, Fa1/3, Fa1/4, Fa1/5, Fa1/6, Fa1/7, Fa1/8, Fa1/9, Fa1/10, Fa1/11, Fa1/12, Fa1/13, Fa1/14, Fa1/15
1002 fddi-default active
----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 1002 1003
5 enet 100005 1500 - - - - - 0 0
6 enet 100006 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 1 1003
sh int fa1/2
FastEthernet1/2 is down, line protocol is down
Hardware is Fast Ethernet, address is 0017.59bd.af3a (bia 0017.59bd.af3a)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 195/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
"
Received 25134 broadcasts, 0 runts, 0 giants, 0 throttles
3146495 input errors, 1271941 CRC,
0 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
copchgasr4#sh int fa1/3
FastEthernet1/3 is up, line protocol is down
Hardware is Fast Ethernet, address is 0017.59bd.af3b (bia 0017.59bd.af3b)
Description: Connection to MDS I-NET 900 AP Radio 172.29.12.100
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Auto-duplex, Auto-speed
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
706 packets output, 57186 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
copchgasr4#sh int fa1/4
FastEthernet1/4 is up, line protocol is down
Hardware is Fast Ethernet, address is buffer
what does this mean?????
