09-02-2008 02:09 PM - edited 03-15-2019 01:00 PM
Is unity connection 2.X supported o a MCS 7816? The documentation shows as the 7815 being supported but I can't find anything about the 7816.
Thanks
09-02-2008 03:51 PM
Hi Gabriel,
Unfortunately the answer is no. Installation of Unity Connection 2.x is not supported on the MCS 7816. The application requires a more powerful processor than the one on that server.
Regards,
Michael.
11-04-2010 03:02 PM
Just curious about this question as I have been trying to get a good answer on this as well. If you were to deploy this server to support NO MORE than 100 users, would the procesor be considred powerful enough at that point, or is the simple overhead of the application too much for a 7816?
I should add that i would want to use this platform for unity connection 8.0
11-05-2010 06:13 AM
Hi there,
The 7816 will not work here When installing UC there is a very
stringent hardware check that will not pass with the 7816;
Cheers!
Rob
11-09-2010 11:56 AM
Thanks for the response on that sorry but I find myself needing to know "why" rather than just "its not supported" so i can talk intelligently to customers.
11-09-2010 07:47 PM
I'm going to be very honest with you. Here's the why:
The 7816 is the lowest level server you can get for UC. It simply does not have enough memory, RAM, HDD, or CPU to support the application. You can find the details in the hardware guide...but that's it in a nutshell.
Secondly, you should not be talking to any customers about 7816 server. It is widely practiced that the minimum production boxes used are 7825. 7815/7816 are almost exclusively used as lab boxes only by almost all credible vendors.
Hailey
Please rate helpful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide